Millcreek Foundation Pros
Patio Lifting in Millcreek, UT
Patio lifting and polyjacking in Millcreek with polyurethane foam, same-day results, free estimates for settled backyard patios.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Millcreek and nearby communities.
A patio that pools water after a storm or spring snowmelt usually means one or more slab sections have settled below grade. Millcreek Foundation Pros lifts those sections back into place with polyjacking, using polyurethane foam injection instead of tearing out the slab, so drainage gets corrected without a full replacement.
What's included
What's included with Patio Lifting
- Typically included — patio slab inspection, void check, access point drilling, foam injection, elevation verification, and hole patching.
- Optional — slope correction to restore positive drainage away from the house.
- Customer prep — clear furniture, planters, and grills off the patio before the crew arrives.
Want a clearer scope?
Get a Free EstimateHow it works
How our Patio Lifting process works
Step 1Patio Assessment
Uneven or settled patio sections are identified for repair.
Step 2Access Point Drilling
Small holes are made at key points across the patio surface.
Step 3Foam Injection
Expanding material is injected to raise the settled sections.
Step 4Level Verification
Elevation is checked throughout the lifting process for accuracy.
Step 5Hole Patching
Access points are filled and smoothed to match the patio surface.
Step 6Final Walkthrough
The patio is inspected to confirm a level, stable finish.
Materials
Materials and methods for Patio Lifting
Backyard patios along the Wasatch Front settle unevenly as spring runoff saturates the soil beneath the slab, which is why lift accuracy matters more than raw lift strength.
Polyurethane Foam
Lifts patio slabs with minimal disruption to surrounding landscaping, important on patios bordered by plantings.
Patch Compound
Fills and finishes drilled access holes smoothly so the surface stays clean.
Joint Filler
Restores expansion joints after the lifting process to keep water out between panels.
Surface Sealant
Guards the patio against moisture and surface wear through winter freeze cycles.
Leveling Tools
Used to verify consistent elevation across the patio during the lift.
Bonding Agent
Enhances adhesion between patch material and existing concrete.
Questions on materials?
Get a Free EstimateCodes & permits
Permits and codes for Patio Lifting
Permit rules vary by jurisdiction. Confirm with Salt Lake County or your city before scheduling.
| Typically needs a permit | Often no permit |
|---|---|
| New patio slab pours or full replacement | Polyjacking or foam lifting of an existing patio slab |
| Patio work tied to a broader structural foundation repair | Patching drill holes after a lifting job |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Patio Lifting
| DIY | Hire a pro |
|---|---|
| Sealing surface cracks with a concrete patch kit is a reasonable homeowner task | Correcting a void under a settled slab requires pressure-controlled foam injection equipment |
| Clearing drainage paths away from the patio edge helps reduce future pooling | A pro restores proper drainage slope, not just surface appearance |
| — | Sealing cracks alone won't fix pooling caused by a void under the slab |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Patio Lifting
Call Millcreek Foundation Pros for a free patio assessment.
- Standing water collects on the patio after rain or snowmelt
- An uneven section creates a trip hazard near a sliding door threshold
- A slab panel has visibly dropped compared to its neighbors
Seeing warning signs?
Get a Free EstimateBefore & after
Before and after Patio Lifting
Before 
After
FAQs
Patio Lifting FAQs
Why is water pooling on my patio?
A settled slab section is usually sitting below the grade it was originally poured at, trapping water instead of letting it drain away.
Is polyurethane foam better than mudjacking for a patio?
For most patios. Foam cures faster and adds less weight to soil that's already settling.
How much does patio lifting cost?
Most single-section lifts run $400 to $1,000. Larger patios with multiple settled sections run higher.
How long before I can use the patio again?
Most polyjacked patios are usable within a few hours of the injection, often the same day.
Do I need a permit to lift my patio?
Lifting an existing patio slab generally doesn't require a permit since no structural alteration occurs.
Can I fix a settled patio myself?
Surface crack fillers don't address the void beneath the slab. Foam injection requires equipment a homeowner doesn't have access to.
How long does a patio lifting job take?
Most jobs finish within a few hours and the patio is usable the same day.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Millcreek using push piers, helical piers, and epoxy injection. Free estimates, written scope before work starts.
Piering and Underpinning
Push pier and helical pier underpinning in Millcreek for settling foundations. Free estimates, written per-pier cost breakdown.
Wall Stabilization
Carbon fiber straps and steel bracing for bowing basement walls in Millcreek. Free estimates, written scope before work starts.
Ask about Patio Lifting
Tell us about the project and how to reach you.