Millcreek Foundation Pros
Concrete Lifting in Millcreek, UT
Concrete lifting and polyjacking in Millcreek using hydrophobic polyurethane foam, same-day results, free estimates for sunken slabs.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Millcreek and nearby communities.
Sunken driveways, patios, and sidewalks along the Wasatch Front are usually a freeze-thaw story: the soil beneath the slab compacts and shifts season after season until the concrete settles unevenly. Millcreek Foundation Pros uses polyjacking with hydrophobic polyurethane foam instead of old-style mudjacking, lifting the slab back to grade through small drilled holes rather than tearing it out.
What's included
What's included with Concrete Lifting
- Typically included — slab inspection, void assessment, dime-sized drill holes, polyurethane foam injection, elevation check, and hole patching.
- Optional — slope correction for drainage if the settled slab was directing water toward the house.
- Customer prep — clear vehicles, planters, or furniture off the slab area before the crew arrives.
Want a clearer scope?
Get a Free EstimateHow it works
How our Concrete Lifting process works
Step 1Surface Assessment
Uneven or sunken concrete areas are identified and measured.
Step 2Drilling Access Holes
Small holes are drilled into the concrete to allow material injection.
Step 3Material Injection
Expanding foam is injected beneath the slab to raise it evenly.
Step 4Elevation Monitoring
Lift progress is measured to achieve the desired level.
Step 5Hole Patching
Access holes are filled and finished to match the surrounding surface.
Step 6Final Inspection
The lifted area is reviewed for levelness and stability.
Materials
Materials and methods for Concrete Lifting
Freeze-thaw cycling along the bench terrain is the main reason Millcreek slabs settle, and lightweight foam handles that soil movement better than old mudjacking mixes ever did.
Polyurethane Foam
Expands beneath slabs to lift and stabilize concrete surfaces without adding the heavy load that mud mix does to already-settled soil.
Injection Ports
Allow controlled placement of lifting material under the slab so the lift happens evenly across the sunken section.
Patch Compound
Fills drilled access holes for a smooth finish on the repaired surface.
Surface Sealant
Protects the repaired area from moisture and staining through winter freeze cycles.
Leveling Gauge
Used to measure and confirm slab elevation during lifting for an even result.
Bonding Agent
Improves adhesion between new patch material and existing concrete so patches don't pop loose.
Questions on materials?
Get a Free EstimateCost
What does a Concrete Lifting cost in Millcreek?
Cost scales with square footage and how far the slab has settled. Here's a general range before your free estimate.
| Project type | Typical range | What’s included |
|---|---|---|
| Small slab section | $400–$1,200, | single sunken panel such as a step or small walkway segment. |
| Standard driveway or patio area | $1,000–$3,000, | polyjacking across a typical settled section. |
| Large or multi-section lift | $3,000–$6,000, | driveway or patio spanning several settled panels. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and codes for Concrete Lifting
Permit rules can vary by jurisdiction and project scope. Check with Salt Lake County or your city before scheduling.
| Typically needs a permit | Often no permit |
|---|---|
| New concrete pours or slab replacement work | Polyjacking or foam injection lifting an existing slab |
| Structural slab work tied to a foundation repair | Patching drill holes after a lifting job |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Concrete Lifting
| DIY | Hire a pro |
|---|---|
| Filling surface cracks with a concrete patch kit is fine for cosmetic wear | Lifting a settled slab requires pressure-controlled foam injection equipment homeowners don't have |
| Regrading soil next to a slab edge is a reasonable homeowner task | A pro assesses the void under the slab, not just the visible dip |
| — | Improper DIY lifting attempts can crack the slab further |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Concrete Lifting
Call Millcreek Foundation Pros for a free slab assessment before the gap gets worse.
- A driveway, patio, or sidewalk section has sunk or created a trip hazard
- Water is pooling on a slab that used to drain away from the house
- A slab edge has separated from an adjoining panel
Seeing warning signs?
Get a Free EstimateBefore & after
Before and after Concrete Lifting
Before 
After
FAQs
Concrete Lifting FAQs
Is polyurethane foam better than mudjacking?
For most Millcreek slabs. Foam is lightweight, cures fast, and doesn't add the heavy load that mud mix puts on already-unstable soil.
How long before I can walk or drive on the slab?
Most polyjacked slabs are ready to walk or drive on within a few hours of the injection.
What does concrete lifting cost compared to replacement?
Polyjacking typically costs 50-80% less than tearing out and repouring the same section of concrete.
Do I need a permit for concrete lifting?
Lifting an existing slab with foam injection generally doesn't require a permit since no structural alteration occurs.
Can I lift a sunken slab myself?
No. Foam injection requires pressure-controlled equipment and experience reading the void beneath the slab, which isn't a DIY-accessible process.
How long does a typical concrete lifting job take?
Most single-slab jobs finish in a few hours and are walkable the same day.
What causes a slab to sink in the first place?
Freeze-thaw cycling and soil compaction under the slab over time, common along the Wasatch Front bench terrain.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Millcreek using push piers, helical piers, and epoxy injection. Free estimates, written scope before work starts.
Piering and Underpinning
Push pier and helical pier underpinning in Millcreek for settling foundations. Free estimates, written per-pier cost breakdown.
Wall Stabilization
Carbon fiber straps and steel bracing for bowing basement walls in Millcreek. Free estimates, written scope before work starts.
Ask about Concrete Lifting
Tell us about the project and how to reach you.